Bộ phát video không dây Accsoon CineEye 2S Pro

* Tại TP.HCM - Liên hệ trực tiếp Mr Yên 0939 24 0939 để được tư vấn và hỗ trợ giá tốt nhất

Khuyến mãi hỗ trợ giá mùa Covid  thời gián từ 31/05/2021 đến 15/06/2021. Chương trình có thể kết thúc trước thời hạn khi hết hàng.

Bộ phát video không dây Accsoon CineEye 2S Pro

SDI&HDMI Dual Interface

The transmitter & Receiver both support SDI+HDMI input, applicable for all kinds of cameras.

2.4GHz/5GHz Dual-Band Transmission

CineEye 2S Pro is equipped with Accsoon’s independent Gemini Dual-Band Transmission technology, allowing it to stream the signal via 2.4GHz and 5GHz WIFI at the same time. Then the receiver can intelligently identify interference and combine the two streams to form the complete audio and video stream, greatly improves its stability and anti-interference ability. With Dual-Band Transmission, CineEye 2S Pro is far more stable than traditional WI-FI video transmitter that only stream in 5GHz. Once on set, CineEye 2S Pro will provide you with a stable and glitch-free stream, handling even the toughest environment with ease.

True Wireless Productivity on Set

Latency is a big thing for wireless video transmitters. From the transmitter to the receiver, CineEye 2S Pro has less than 0.06s of latency, which is the best performance in its range. No matter if it’s monitoring or follow focus, CineEye 2S Pro can handle it.

Experience like never before

With Accsoon GO App, the latency on iPad is less than 0.06s, equal to other professional monitors.Now with more professional monitoring tools in our app, your iPad can turn into a pro-level on-set monitor.

1200ft(350m)

Thanks to Dual-Band Transmission, CineEye 2S Pro’s transmission range can now reach 350m line-of-sight. With this long range, you can check what’s happening real-time on set even if you’re quite far away from it.

One Transmitter for Multiple Receivers

CineEye 2S Pro can send to up to 4 receivers. CineEye 2S Pro receivers, iPhones, iPads, Androids devices mix and match. Meet your various monitoring needs.

High Quality Video & Audio Transmission

CineEye 2S Pro supports video input of up to 1080p 60fps. Also supports 44.1KHz/48KHz 16bit/24bit audio input, and it streams the audio with low compression codec, giving you near lossless audio monitoring experience.

Professional Monitoring App

The best Monitoring App in its class. Supports both Android and iOS. Comes with all the popular monitoringfeatures like: Audio & Video Recording, False Color, Focus Assist, Histogram, Waveform, Loading 3D LUTs and CDLs, Custom Anamorphic Ratio, Custom Ratio Guides etc.

Automatic Channel Selection

The best Monitoring App in its class. Supports both Android and iOS. Comes with all the popular monitoringfeatures like: Audio & Video Recording, False Color, Focus Assist, Histogram, Waveform, Loading 3D LUTs and CDLs, Custom Anamorphic Ratio, Custom Ratio Guides etc.

No-Fan Design

CineEye 2S Pro has very low power draw, a single NP-F970 battery can last you 20 hours.CineEye 2S Pro also has no fans inside, ensuring zero fan noise and a complaint-free sound department.

Rotate and That’s It

With CineEye 2S Pro, we abandoned the over-complicated transmitter-to-receiver pairing process, and instead innovatively introduced the “Pairing Knob”.All you need to do, is to rotate the knob on both the transmitter and receiver to the same number, then that’s it. Your transmitter and receiver(s) are now successfully paired!

1.3 inch OLED Screen

CineEye 2S Pro is equipped with a high-bright OLED screen. Paired with a clean and simple UI, you can easily learn about the real-time connection status and battery voltage. And with simple control logic, you can quickly adjust settings on the transmitter and receivers such as Video Quality Modes and Channel Selection.

Live Long and Hot Swap

You can power CineEye 2S Pro with NP-F550/750/970 batteries and DC input (7.4V-16.8V). These two will be automatically hot-swapped, never putting a stop to your work on set.

Easy Firmware Updates

CineEye 2S Pro support firmware updates. No sophisticated process needed, you can directly update your transmitter and receiver on the app.